配置提交

.idea/huojv.iml

@@ -2,7 +2,7 @@
 <module type="PYTHON_MODULE" version="4">
   <component name="NewModuleRootManager">
     <content url="file://$MODULE_DIR$" />
-    <orderEntry type="jdk" jdkName="Python 3.9" jdkType="Python SDK" />
+    <orderEntry type="jdk" jdkName="Python 3.12 virtualenv at C:\Users\Administrator\Downloads\huojv\huojv\.venv" jdkType="Python SDK" />
     <orderEntry type="sourceFolder" forTests="false" />
   </component>
 </module>

.idea/misc.xml

@@ -3,5 +3,5 @@
   <component name="Black">
     <option name="sdkName" value="D:\CONDA\anaconda3" />
   </component>
-  <component name="ProjectRootManager" version="2" project-jdk-name="Python 3.9" project-jdk-type="Python SDK" />
+  <component name="ProjectRootManager" version="2" project-jdk-name="Python 3.12 virtualenv at C:\Users\Administrator\Downloads\huojv\huojv\.venv" project-jdk-type="Python SDK" />
 </project>

config.json

@@ -1,33 +1,43 @@
 {
     "groups": [
         {
-            "name": "电脑2",
-            "serial_port": "COM13",
+            "name": "服务器",
+            "serial_port": "COM17",
             "serial_baudrate": 9600,
             "camera_index": 1,
             "camera_width": 1920,
             "camera_height": 1080,
-            "move_velocity": 400,
+            "move_velocity": 470,
+            "active": true
+        },
+        {
+            "name": "2号机",
+            "serial_port": "COM14",
+            "serial_baudrate": 9600,
+            "camera_index": 2,
+            "camera_width": 1920,
+            "camera_height": 1080,
+            "move_velocity": 360,
             "active": false
         },
         {
-            "name": "服务器",
-            "serial_port": "COM12",
+            "name": "3号机",
+            "serial_port": "COM16",
             "serial_baudrate": 9600,
             "camera_index": 0,
             "camera_width": 1920,
             "camera_height": 1080,
-            "move_velocity": 470,
-            "active": true
+            "move_velocity": 360,
+            "active": false
         }
     ],
     "display": {
         "preview_width": 1920,
         "preview_height": 1080,
-        "preview_columns": 1,
-        "preview_rows": 1,
+        "preview_columns": 2,
+        "preview_rows": 2,
         "show_preview": true,
         "preview_multi_window": false,
-        "preview_use_all_groups": false
+        "preview_use_all_groups": true
     }
 }

gui_config.py

@@ -214,13 +214,28 @@ class ConfigGUI:
         
         # 确保串口下拉框列表与当前值一致
         if group and 'serial_port' in group:
-            # 如果当前串口不在选项里，追加
             values = list(self.serial_port_cb.cget('values')) if self.serial_port_cb.cget('values') else []
             port_value = group['serial_port']
-            if port_value not in values:
-                values.append(port_value)
-                self.serial_port_cb['values'] = values
-            self.serial_port_cb.set(port_value)
+            
+            # 如果当前值不在列表中，尝试通过设备名匹配
+            matched = False
+            if hasattr(self, 'port_display_map'):
+                for display_text, device in self.port_display_map.items():
+                    if device == port_value:
+                        if display_text not in values:
+                            values.append(display_text)
+                        self.serial_port_cb.set(display_text)
+                        matched = True
+                        break
+            
+            if not matched:
+                # 如果找不到匹配，直接添加原始值
+                if port_value not in values:
+                    values.append(port_value)
+                    if not hasattr(self, 'port_display_map'):
+                        self.port_display_map = {}
+                    self.port_display_map[port_value] = port_value
+                self.serial_port_cb.set(port_value)
 
     def scan_cameras(self, max_index: int = 10):
         """扫描系统可用的采集卡索引，并填充下拉框"""
@@ -302,23 +317,59 @@ class ConfigGUI:
             self.camera_index_cb.set(found[0])
     
     def scan_ports(self):
-        """扫描系统可用的串口，并填充下拉框"""
+        """扫描系统可用的串口，并填充下拉框（显示设备描述）"""
+        from utils.device_scanner import scan_serial_ports_with_info
+        
         found_real = []
+        port_display_map = {}  # 显示文本 -> 实际设备名
+        
         try:
-            ports = serial.tools.list_ports.comports()
-            found_real = [port.device for port in ports]
-            # 按端口名排序
-            found_real.sort(key=lambda x: int(x.replace('COM', '')) if x.replace('COM', '').isdigit() else 999)
+            ports_info = scan_serial_ports_with_info()
+            for port_info in ports_info:
+                device = port_info['device']
+                description = port_info.get('description', '')
+                hwid = port_info.get('hwid', '')
+                
+                # 显示格式：COM3 (设备描述) [HWID]
+                if description:
+                    display_text = f"{device} ({description})"
+                else:
+                    display_text = device
+                
+                # 如果有HWID，添加到显示中（较短版本）
+                if hwid:
+                    # 提取VID/PID部分（如果存在）
+                    if 'VID_' in hwid and 'PID_' in hwid:
+                        import re
+                        vid_match = re.search(r'VID_([0-9A-F]+)', hwid)
+                        pid_match = re.search(r'PID_([0-9A-F]+)', hwid)
+                        if vid_match and pid_match:
+                            display_text += f" [{vid_match.group(1)}:{pid_match.group(1)}]"
+                
+                found_real.append(display_text)
+                port_display_map[display_text] = device
         except Exception as e:
             print(f"扫描串口错误: {e}")
+            # 回退到简单扫描
+            try:
+                ports = serial.tools.list_ports.comports()
+                found_real = [port.device for port in ports]
+                found_real.sort(key=lambda x: int(x.replace('COM', '')) if x.replace('COM', '').isdigit() else 999)
+                port_display_map = {p: p for p in found_real}
+            except:
+                pass
         
         # 如果没有发现实际端口，使用默认端口列表
         if not found_real:
-            found = ["COM1", "COM2", "COM3", "COM4", "COM5", "COM6"]  # 默认给一些常见端口
+            found = ["COM1", "COM2", "COM3", "COM4", "COM5", "COM6"]
+            port_display_map = {p: p for p in found}
             messagebox.showwarning("警告", "未发现可用串口设备，已添加常用默认选项")
         else:
             found = found_real
-            messagebox.showinfo("扫描完成", f"发现可用串口: {', '.join(found)}")
+            messagebox.showinfo("扫描完成", f"发现 {len(found)} 个串口设备\n\n设备信息已包含描述和硬件ID")
+        
+        # 保存映射关系，用于后续获取实际设备名
+        self.port_display_map = port_display_map
         
         self.serial_port_cb['values'] = found
         # 若当前无选择，则选择第一项
@@ -390,6 +441,11 @@ class ConfigGUI:
                     else:
                         # 字符串字段
                         value = value_str if value_str else group.get(key, '')
+                        # 特殊处理串口：从显示文本中提取实际设备名
+                        if key == 'serial_port' and hasattr(self, 'port_display_map'):
+                            # 如果值是显示文本，转换为实际设备名
+                            if value in self.port_display_map:
+                                value = self.port_display_map[value]
                     
                     group[key] = value
                 except Exception as e:
@@ -467,6 +523,11 @@ class ConfigGUI:
                     else:
                         # 字符串字段
                         value = value_str if value_str else group.get(key, '')
+                        # 特殊处理串口：从显示文本中提取实际设备名
+                        if key == 'serial_port' and hasattr(self, 'port_display_map'):
+                            # 如果值是显示文本，转换为实际设备名
+                            if value in self.port_display_map:
+                                value = self.port_display_map[value]
                     
                     group[key] = value
                 except Exception as e:
@@ -500,7 +561,7 @@ class ConfigGUI:
         return result
     
     def start_program(self):
-        """启动单个配置组的主程序"""
+        """启动单个配置组的主程序并自动弹出采集卡预览窗口"""
         # 保存配置（静默）
         if not self.save_config_silent():
             messagebox.showerror("错误", "配置保存失败")
@@ -527,11 +588,13 @@ class ConfigGUI:
             ], creationflags=subprocess.CREATE_NEW_CONSOLE if sys.platform == 'win32' else 0)
             
             messagebox.showinfo("成功", f"已启动配置组: {active_group['name']}\n\n请在控制台查看运行状态")
+            # 成功后弹出预览
+            self.start_preview()
         except Exception as e:
             messagebox.showerror("错误", f"启动失败: {e}")
     
     def start_multi_program(self):
-        """启动多个配置组的主程序"""
+        """启动多个配置组的主程序并自动弹出采集卡预览窗口"""
         # 保存配置（静默）
         if not self.save_config_silent():
             messagebox.showerror("错误", "配置保存失败")
@@ -547,6 +610,8 @@ class ConfigGUI:
             ], creationflags=subprocess.CREATE_NEW_CONSOLE if sys.platform == 'win32' else 0)
             
             messagebox.showinfo("提示", "多配置组启动器已打开\n\n请在控制台中选择要启动的配置组")
+            # 成功后弹出预览
+            self.start_preview()
         except Exception as e:
             messagebox.showerror("错误", f"启动失败: {e}")
     
@@ -557,4 +622,3 @@ class ConfigGUI:
 if __name__ == "__main__":
     app = ConfigGUI()
     app.run()
-

main.py

@@ -62,6 +62,18 @@ rw = (632, 378)
 v = active_group['move_velocity']
 
 def yolo_shibie(im_PIL, detections, model):
+    detections = {
+        'center': None,
+        'next': None,
+        'npc1': None,
+        'npc2': None,
+        'npc3': None,
+        'npc4': None,
+        'boss': None,
+        'daojv': [],
+        'gw': [],
+        'zhaozi': None
+    }
     results = model(im_PIL)  # 目标检测
     for result in results:
         for i in range(len(result.boxes.xyxy)):
@@ -186,7 +198,7 @@ while True:
         continue
     detections = yolo_shibie(im_opencv[1], detections, model)
     
-    if shizi.tuwai(im_opencv[0]):  # 进图算法
+    if shizi.tuwai(im_opencv[0]) or yolo_shibie(im_opencv[1], model0)['npc1'] is not None or yolo_shibie(im_opencv[1], model0)['npc2'] is not None or yolo_shibie(im_opencv[1], model0)['npc3'] is not None or yolo_shibie(im_opencv[1], model0)['npc4'] is not None:  # 进图算法  # 进图算法
         im_opencv = get_image.get_frame()  # [RGB,PIL]
         if im_opencv is None:
             print("⚠️ 无法获取图像帧，跳过本次循环")
@@ -213,8 +225,12 @@ while True:
             move_to(rw, mb)
             continue
         elif detections['npc4'] is not None:
-            if sq(detections['npc4'], rw) < 50:
-                print("离npc4很近 直接进入")
+            npc4_pos = detections['npc4']
+            current_distance = sq(npc4_pos, rw)
+            
+            # 如果已经非常接近，直接进入
+            if current_distance < 30:
+                print(f"离npc4很近 (距离={current_distance:.1f})，直接进入")
                 keyboard.send_data("DD")
                 time.sleep(0.15)
                 keyboard.release()
@@ -227,18 +243,132 @@ while True:
                     mouse_gui.send_data_absolute(rw[0], rw[1] - 110, may=1)
                     time.sleep(1)
                 continue
-            else:
-                print("离npc4有点远 点击进入")
-                move_to(rw, detections['npc4'])
+            
+            # 循环靠近npc4，直到足够接近或达到最大尝试次数
+            print(f"开始靠近npc4，当前距离={current_distance:.1f}")
+            max_attempts = 15  # 最大尝试次数
+            attempt = 0
+            last_distance = current_distance
+            stuck_count = 0  # 卡住计数器
+            
+            while attempt < max_attempts:
+                attempt += 1
+                
+                # 重新获取当前位置和npc4位置
+                im_opencv = get_image.get_frame()
+                if im_opencv is None:
+                    print("⚠️ 无法获取图像帧")
+                    break
+                
+                detections_temp = {
+                    'center': None, 'next': None,
+                    'npc1': None, 'npc2': None, 'npc3': None, 'npc4': None,
+                    'boss': None, 'zhaozi': None,
+                    'daojv': [], 'gw': []
+                }
+                detections_temp = yolo_shibie(im_opencv[1], detections_temp, model0)
+                
+                # 如果npc4丢失，重新检测
+                if detections_temp['npc4'] is None:
+                    print(f"⚠️ npc4丢失，重新检测 (尝试 {attempt}/{max_attempts})")
+                    time.sleep(0.5)
+                    continue
+                
+                npc4_pos = detections_temp['npc4']
+                current_distance = sq(npc4_pos, rw)
+                
+                print(f"  尝试 {attempt}/{max_attempts}: 距离npc4={current_distance:.1f}")
+                
+                # 如果已经足够接近，退出循环
+                if current_distance < 35:
+                    print(f"✅ 已足够接近npc4 (距离={current_distance:.1f})")
+                    break
+                
+                # 检测是否卡住（距离不再减小）
+                if abs(current_distance - last_distance) < 5:
+                    stuck_count += 1
+                    if stuck_count >= 3:
+                        print(f"⚠️ 检测到卡住，尝试微调移动")
+                        # 尝试向npc4方向微调
+                        dx = npc4_pos[0] - rw[0]
+                        dy = npc4_pos[1] - rw[1]
+                        # 计算方向向量，但只移动一小段距离
+                        step_size = 50  # 小步移动
+                        distance_to_move = min(step_size, current_distance * 0.3)
+                        if abs(dx) > abs(dy):
+                            # 主要横向移动
+                            target_x = rw[0] + int(dx / abs(dx) * distance_to_move) if dx != 0 else rw[0]
+                            target_y = rw[1]
+                        else:
+                            # 主要纵向移动
+                            target_x = rw[0]
+                            target_y = rw[1] + int(dy / abs(dy) * distance_to_move) if dy != 0 else rw[1]
+                        mb = (target_x, target_y)
+                        move_to(rw, mb)
+                        time.sleep(0.3)
+                        stuck_count = 0
+                    else:
+                        # 正常移动，但使用小步长
+                        step_size = min(80, current_distance * 0.4)  # 移动距离为目标距离的40%，最多80像素
+                        dx = npc4_pos[0] - rw[0]
+                        dy = npc4_pos[1] - rw[1]
+                        # 归一化方向向量
+                        if abs(dx) > 0.1 or abs(dy) > 0.1:
+                            direction_mag = math.sqrt(dx*dx + dy*dy)
+                            target_x = rw[0] + int(dx / direction_mag * step_size)
+                            target_y = rw[1] + int(dy / direction_mag * step_size)
+                            mb = (target_x, target_y)
+                            move_to(rw, mb)
+                            time.sleep(0.2)  # 短暂等待，让角色移动
+                else:
+                    # 距离在减小，正常移动
+                    stuck_count = 0
+                    step_size = min(100, current_distance * 0.5)  # 移动距离为目标距离的50%，最多100像素
+                    dx = npc4_pos[0] - rw[0]
+                    dy = npc4_pos[1] - rw[1]
+                    # 归一化方向向量
+                    if abs(dx) > 0.1 or abs(dy) > 0.1:
+                        direction_mag = math.sqrt(dx*dx + dy*dy)
+                        target_x = rw[0] + int(dx / direction_mag * step_size)
+                        target_y = rw[1] + int(dy / direction_mag * step_size)
+                        mb = (target_x, target_y)
+                        move_to(rw, mb)
+                        time.sleep(0.2)  # 短暂等待，让角色移动
+                
+                last_distance = current_distance
+                
+                # 短暂延迟，让角色位置更新
+                time.sleep(0.3)
+            
+            # 移动完成后，检查是否可以进入
+            final_distance = sq(npc4_pos, rw)
+            print(f"靠近完成，最终距离={final_distance:.1f}")
+            
+            if final_distance < 50:
+                print("距离足够近，尝试进入")
+                keyboard.send_data("DD")
+                time.sleep(0.15)
+                keyboard.release()
                 time.sleep(1)
-                im_opencv = get_image.get_frame()  # [RGB,PIL]
+                im_opencv = get_image.get_frame()
                 if im_opencv is None:
                     print("⚠️ 无法获取图像帧")
                     continue
                 if shizi.daoying(im_opencv[0]):
                     mouse_gui.send_data_absolute(rw[0], rw[1] - 110, may=1)
                     time.sleep(1)
-                continue
+            else:
+                print(f"⚠️ 未能足够接近npc4 (距离={final_distance:.1f})，尝试点击进入")
+                move_to(rw, npc4_pos)
+                time.sleep(1)
+                im_opencv = get_image.get_frame()
+                if im_opencv is None:
+                    print("⚠️ 无法获取图像帧")
+                    continue
+                if shizi.daoying(im_opencv[0]):
+                    mouse_gui.send_data_absolute(rw[0], rw[1] - 110, may=1)
+                    time.sleep(1)
+            continue
     elif shizi.tiaozhan(im_opencv[0]):  # 开启挑战
         print('进入塔4')
         mouse_gui.send_data_absolute(left + 1100, top + 600, may=1)

main_single.py

@@ -69,28 +69,42 @@ def run_automation_for_group(group_index):
     v = group['move_velocity']  # 从配置读取移动速度
     
     def yolo_shibie(im_PIL, detections, model):
-        results = model(im_PIL)
-        for result in results:
-            for i in range(len(result.boxes.xyxy)):
-                left, top, right, bottom = result.boxes.xyxy[i]
-                scalar_tensor = result.boxes.cls[i]
-                value = scalar_tensor.item()
-                label = result.names[int(value)]
-                if label == 'center' or label == 'next' or label == 'boss' or label == 'zhaozi':
-                    player_x = int(left + (right - left) / 2)
-                    player_y = int(top + (bottom - top) / 2) + 30
-                    RW = [player_x, player_y]
-                    detections[label] = RW
-                elif label == 'daojv' or label == 'gw':
-                    player_x = int(left + (right - left) / 2)
-                    player_y = int(top + (bottom - top) / 2) + 30
-                    RW = [player_x, player_y]
-                    detections[label].append(RW)
-                elif label == 'npc1' or label == 'npc2' or label == 'npc3' or label == 'npc4':
-                    player_x = int(left + (right - left) / 2)
-                    player_y = int(bottom) + 30
-                    RW = [player_x, player_y]
-                    detections[label] = RW
+        try:
+            results = model(im_PIL)
+            for result in results:
+                if result.boxes is None or len(result.boxes.xyxy) == 0:
+                    continue
+                for i in range(len(result.boxes.xyxy)):
+                    try:
+                        left = float(result.boxes.xyxy[i][0])
+                        top = float(result.boxes.xyxy[i][1])
+                        right = float(result.boxes.xyxy[i][2])
+                        bottom = float(result.boxes.xyxy[i][3])
+                        cls_id = int(result.boxes.cls[i])
+                        label = result.names[cls_id]
+                        
+                        if label == 'center' or label == 'next' or label == 'boss' or label == 'zhaozi':
+                            player_x = int(left + (right - left) / 2) + 3
+                            player_y = int(top + (bottom - top) / 2) + 40
+                            RW = [player_x, player_y]
+                            detections[label] = RW
+                        elif label == 'daojv' or label == 'gw':
+                            player_x = int(left + (right - left) / 2) + 3
+                            player_y = int(top + (bottom - top) / 2) + 40
+                            RW = [player_x, player_y]
+                            if label not in detections:
+                                detections[label] = []
+                            detections[label].append(RW)
+                        elif label == 'npc1' or label == 'npc2' or label == 'npc3' or label == 'npc4':
+                            player_x = int(left + (right - left) / 2)
+                            player_y = int(bottom) + 30
+                            RW = [player_x, player_y]
+                            detections[label] = RW
+                    except Exception as e:
+                        print(f"⚠️ 处理检测框时出错: {e}")
+                        continue
+        except Exception as e:
+            print(f"⚠️ YOLO检测出错: {e}")
         return detections
     
     def sq(p1, p2):
@@ -119,25 +133,76 @@ def run_automation_for_group(group_index):
                     best_point = p
             return best_point
     
+    def safe_keyboard_send(data, max_retries=3):
+        """安全的键盘发送函数，带重试机制"""
+        nonlocal keyboard
+        for attempt in range(max_retries):
+            try:
+                keyboard.send_data(data)
+                return True
+            except (serial.serialutil.SerialException, PermissionError, OSError) as e:
+                if attempt < max_retries - 1:
+                    print(f"⚠️ 键盘发送失败 (尝试 {attempt + 1}/{max_retries}): {e}")
+                    time.sleep(0.1 * (attempt + 1))  # 递增延迟
+                    # 尝试重新初始化串口
+                    try:
+                        if serial.ser and serial.ser.is_open:
+                            serial.ser.close()
+                        time.sleep(0.2)
+                        init_mouse_keyboard(group)
+                        # 重新创建keyboard对象
+                        keyboard = ch9329Comm.keyboard.DataComm()
+                    except Exception as init_e:
+                        print(f"⚠️ 重新初始化串口失败: {init_e}")
+                else:
+                    print(f"❌ 键盘发送失败，已重试 {max_retries} 次: {e}")
+                    raise
+        return False
+    
+    def safe_keyboard_release(max_retries=3):
+        """安全的键盘释放函数，带重试机制"""
+        nonlocal keyboard
+        for attempt in range(max_retries):
+            try:
+                keyboard.release()
+                return True
+            except (serial.serialutil.SerialException, PermissionError, OSError) as e:
+                if attempt < max_retries - 1:
+                    time.sleep(0.1 * (attempt + 1))
+                    # 尝试重新初始化串口
+                    try:
+                        if serial.ser and serial.ser.is_open:
+                            serial.ser.close()
+                        time.sleep(0.2)
+                        init_mouse_keyboard(group)
+                        keyboard = ch9329Comm.keyboard.DataComm()
+                    except Exception as init_e:
+                        print(f"⚠️ 重新初始化串口失败: {init_e}")
+                else:
+                    print(f"⚠️ 键盘释放失败: {e}")
+                    # 释放失败不算致命错误，继续执行
+                    return False
+        return False
+    
     def move_randomly(rw, k):
         k = k % 4
         suiji_t = float(random.randint(10, 13) / 10)
         if k == 0:
-            keyboard.send_data("66")
-            time.sleep(suiji_t)
-            keyboard.release()
+            if safe_keyboard_send("66"):
+                time.sleep(suiji_t)
+                safe_keyboard_release()
         elif k == 1:
-            keyboard.send_data("88")
-            time.sleep(suiji_t)
-            keyboard.release()
+            if safe_keyboard_send("88"):
+                time.sleep(suiji_t)
+                safe_keyboard_release()
         elif k == 2:
-            keyboard.send_data("44")
-            time.sleep(suiji_t)
-            keyboard.release()
+            if safe_keyboard_send("44"):
+                time.sleep(suiji_t)
+                safe_keyboard_release()
         elif k == 3:
-            keyboard.send_data("22")
-            time.sleep(suiji_t)
-            keyboard.release()
+            if safe_keyboard_send("22"):
+                time.sleep(suiji_t)
+                safe_keyboard_release()
         return k + 1
     
     def move_to(rw, mb):
@@ -145,22 +210,22 @@ def run_automation_for_group(group_index):
         nonlocal v
         v = group['move_velocity']
         if rw[0] >= mb[0]:
-            keyboard.send_data("44")
-            time.sleep(float(abs(rw[0] - mb[0]) / v))
-            keyboard.release()
+            if safe_keyboard_send("44"):
+                time.sleep(float(abs(rw[0] - mb[0]) / v))
+                safe_keyboard_release()
         else:
-            keyboard.send_data("66")
-            time.sleep(float(abs(rw[0] - mb[0]) / v))
-            keyboard.release()
+            if safe_keyboard_send("66"):
+                time.sleep(float(abs(rw[0] - mb[0]) / v))
+                safe_keyboard_release()
         
         if rw[1] >= mb[1]:
-            keyboard.send_data("88")
-            time.sleep(float(abs(rw[1] - mb[1]) / v))
-            keyboard.release()
+            if safe_keyboard_send("88"):
+                time.sleep(float(abs(rw[1] - mb[1]) / v))
+                safe_keyboard_release()
         else:
-            keyboard.send_data("22")
-            time.sleep(float(abs(rw[1] - mb[1]) / v))
-            keyboard.release()
+            if safe_keyboard_send("22"):
+                time.sleep(float(abs(rw[1] - mb[1]) / v))
+                safe_keyboard_release()
     
     # 主循环
     print(f"🔄 配置组 {group['name']} 开始自动化循环...")
@@ -211,9 +276,9 @@ def run_automation_for_group(group_index):
                 elif detections['npc4'] is not None:
                     if sq(detections['npc4'], rw) < 50:
                         print(f"[{group['name']}] 离npc4很近 直接进入")
-                        keyboard.send_data("DD")
-                        time.sleep(0.15)
-                        keyboard.release()
+                        if safe_keyboard_send("DD"):
+                            time.sleep(0.15)
+                            safe_keyboard_release()
                         time.sleep(1)
                         im_opencv = get_image.get_frame()
                         if im_opencv and shizi.daoying(im_opencv[0]):
@@ -257,9 +322,9 @@ def run_automation_for_group(group_index):
                 if len(detections['daojv']) != 0:
                     move_to(rw, process_points(detections['daojv']))
                     for i in range(3 + len(detections['daojv'])):
-                        keyboard.send_data("AA")
-                        time.sleep(0.15)
-                        keyboard.release()
+                        if safe_keyboard_send("AA"):
+                            time.sleep(0.15)
+                            safe_keyboard_release()
                     continue
                 if shizi.tuichu(im_opencv[0]) and detections['next'] is None and len(detections['daojv']) == 0 and len(detections['gw']) == 0 and boss_pd:
                     print(f"[{group['name']}] 识别到可以退出挑战！！！！！！！！！！！！！！！！！！")
@@ -314,9 +379,9 @@ def run_automation_for_group(group_index):
                     panduan = True
                     move_to(rw, detections['next'])
                     for i in range(2):
-                        keyboard.send_data("DD")
-                        time.sleep(0.15)
-                        keyboard.release()
+                        if safe_keyboard_send("DD"):
+                            time.sleep(0.15)
+                            safe_keyboard_release()
                     continue
                 else:
                     k = move_randomly(rw, k)
@@ -334,6 +399,14 @@ def run_automation_for_group(group_index):
             traceback.print_exc()
             time.sleep(1)
     
+    # 清理资源
+    try:
+        if serial.ser and serial.ser.is_open:
+            serial.ser.close()
+            print(f"✅ 配置组 {group['name']} 串口已关闭")
+    except Exception as e:
+        print(f"⚠️ 关闭串口时出错: {e}")
+
 if __name__ == "__main__":
     if len(sys.argv) > 1:
         group_index = int(sys.argv[1])

utils/device_scanner.py

@@ -0,0 +1,197 @@
+"""
+设备扫描工具 - 通过唯一标识符而非索引来识别设备
+解决重启后设备序号混乱的问题
+"""
+import cv2
+import serial.tools.list_ports
+import warnings
+import sys
+import io
+from typing import List, Dict, Optional
+
+def get_camera_info(cam_index: int) -> Optional[Dict]:
+    """
+    获取采集卡的详细信息（包括设备名称）
+    :param cam_index: 采集卡索引
+    :return: 包含设备信息的字典，如果失败返回None
+    """
+    old_stderr = sys.stderr
+    suppressed_output = io.StringIO()
+    
+    try:
+        sys.stderr = suppressed_output
+        
+        with warnings.catch_warnings():
+            warnings.filterwarnings('ignore')
+            
+            # 尝试多种后端
+            backends = [
+                (cam_index, cv2.CAP_DSHOW),
+                (cam_index, cv2.CAP_ANY),
+                (cam_index, None),
+            ]
+            
+            cap = None
+            for idx, backend in backends:
+                try:
+                    if backend is not None:
+                        cap = cv2.VideoCapture(idx, backend)
+                    else:
+                        cap = cv2.VideoCapture(idx)
+                    
+                    if cap.isOpened():
+                        ret, frame = cap.read()
+                        if ret and frame is not None:
+                            # 尝试获取设备名称（不同后端可能支持不同）
+                            device_name = None
+                            backend_name = None
+                            
+                            if backend == cv2.CAP_DSHOW:
+                                backend_name = "DirectShow"
+                                # DirectShow可能支持获取设备名称
+                                try:
+                                    # 某些情况下可以通过属性获取
+                                    pass  # OpenCV限制，无法直接获取设备名称
+                                except:
+                                    pass
+                            elif backend == cv2.CAP_ANY:
+                                backend_name = "Any"
+                            else:
+                                backend_name = "Default"
+                            
+                            # 获取分辨率信息作为辅助标识
+                            width = int(cap.get(cv2.CAP_PROP_FRAME_WIDTH))
+                            height = int(cap.get(cv2.CAP_PROP_FRAME_HEIGHT))
+                            
+                            cap.release()
+                            
+                            return {
+                                'index': cam_index,
+                                'backend': backend_name,
+                                'width': width,
+                                'height': height,
+                                'name': f"采集卡-{cam_index}",
+                                'available': True
+                            }
+                        else:
+                            if cap:
+                                cap.release()
+                                cap = None
+                except Exception:
+                    if cap:
+                        try:
+                            cap.release()
+                        except:
+                            pass
+                        cap = None
+                    continue
+            
+            return None
+    finally:
+        sys.stderr = old_stderr
+
+def scan_cameras_with_info(max_index: int = 10) -> List[Dict]:
+    """
+    扫描所有可用采集卡，返回详细信息列表
+    :param max_index: 最大扫描索引
+    :return: 采集卡信息列表
+    """
+    cameras = []
+    for i in range(max_index + 1):
+        info = get_camera_info(i)
+        if info:
+            cameras.append(info)
+    return cameras
+
+def get_serial_port_info(port_name: str) -> Optional[Dict]:
+    """
+    获取串口的详细信息（包括硬件ID和描述）
+    :param port_name: 串口名称（如 "COM3"）
+    :return: 包含串口信息的字典
+    """
+    try:
+        ports = serial.tools.list_ports.comports()
+        for port in ports:
+            if port.device == port_name:
+                return {
+                    'device': port.device,
+                    'description': port.description,
+                    'hwid': port.hwid,  # 硬件ID（唯一标识）
+                    'vid': port.vid if hasattr(port, 'vid') else None,
+                    'pid': port.pid if hasattr(port, 'pid') else None,
+                    'serial_number': port.serial_number if hasattr(port, 'serial_number') else None,
+                    'manufacturer': port.manufacturer if hasattr(port, 'manufacturer') else None,
+                    'name': port.description or port.device
+                }
+    except Exception as e:
+        print(f"⚠️ 获取串口信息失败: {e}")
+    
+    return None
+
+def scan_serial_ports_with_info() -> List[Dict]:
+    """
+    扫描所有可用串口，返回详细信息列表
+    :return: 串口信息列表
+    """
+    ports_info = []
+    try:
+        ports = serial.tools.list_ports.comports()
+        for port in ports:
+            info = {
+                'device': port.device,
+                'description': port.description,
+                'hwid': port.hwid,
+                'vid': port.vid if hasattr(port, 'vid') else None,
+                'pid': port.pid if hasattr(port, 'pid') else None,
+                'serial_number': port.serial_number if hasattr(port, 'serial_number') else None,
+                'manufacturer': port.manufacturer if hasattr(port, 'manufacturer') else None,
+                'name': port.description or port.device
+            }
+            ports_info.append(info)
+    except Exception as e:
+        print(f"⚠️ 扫描串口失败: {e}")
+    
+    # 按设备名排序
+    ports_info.sort(key=lambda x: int(x['device'].replace('COM', '')) if x['device'].replace('COM', '').isdigit() else 999)
+    return ports_info
+
+def find_camera_by_index(cameras: List[Dict], index: int) -> Optional[Dict]:
+    """通过索引查找采集卡"""
+    for cam in cameras:
+        if cam['index'] == index:
+            return cam
+    return None
+
+def find_serial_by_hwid(ports: List[Dict], hwid: str) -> Optional[Dict]:
+    """通过硬件ID查找串口（最可靠）"""
+    for port in ports:
+        if port['hwid'] == hwid:
+            return port
+    return None
+
+def find_serial_by_device(ports: List[Dict], device: str) -> Optional[Dict]:
+    """通过设备名查找串口（兼容旧配置）"""
+    for port in ports:
+        if port['device'] == device:
+            return port
+    return None
+
+if __name__ == "__main__":
+    # 测试代码
+    print("=" * 60)
+    print("采集卡扫描:")
+    print("=" * 60)
+    cameras = scan_cameras_with_info()
+    for cam in cameras:
+        print(f"  索引 {cam['index']}: {cam['name']} ({cam['width']}x{cam['height']})")
+    
+    print("\n" + "=" * 60)
+    print("串口扫描:")
+    print("=" * 60)
+    ports = scan_serial_ports_with_info()
+    for port in ports:
+        print(f"  {port['device']}: {port['name']}")
+        print(f"    硬件ID: {port['hwid']}")
+        if port['vid'] and port['pid']:
+            print(f"    VID/PID: {port['vid']:04X}/{port['pid']:04X}")
+

utils/mouse.py

@@ -10,18 +10,32 @@ mouse = None
 def init_mouse_keyboard(config_group):
     """初始化鼠标和串口"""
     global serial, mouse
+    from utils.logger import logger
+    
     # 初始化串口
-    serial.ser = serial.Serial(
-        config_group['serial_port'], 
-        config_group['serial_baudrate']
-    )
+    try:
+        logger.info(f"🔧 正在打开串口: {config_group['serial_port']} @ {config_group['serial_baudrate']}")
+        serial.ser = serial.Serial(
+            config_group['serial_port'], 
+            config_group['serial_baudrate'],
+            timeout=1
+        )
+        logger.info(f"✅ 串口已打开: {config_group['serial_port']} @ {config_group['serial_baudrate']}")
+    except Exception as e:
+        logger.error(f"❌ 串口打开失败: {e}")
+        raise
+    
     # 初始化鼠标
-    mouse = ch9329Comm.mouse.DataComm(
-        config_group['camera_width'], 
-        config_group['camera_height']
-    )
-    print(f"✅ 串口已打开: {config_group['serial_port']} {config_group['serial_baudrate']}")
-    print(f"✅ 鼠标已初始化: {config_group['camera_width']}x{config_group['camera_height']}")
+    try:
+        logger.info(f"🔧 正在初始化鼠标: {config_group['camera_width']}x{config_group['camera_height']}")
+        mouse = ch9329Comm.mouse.DataComm(
+            config_group['camera_width'], 
+            config_group['camera_height']
+        )
+        logger.info(f"✅ 鼠标已初始化: {config_group['camera_width']}x{config_group['camera_height']}")
+    except Exception as e:
+        logger.error(f"❌ 鼠标初始化失败: {e}")
+        raise
 
 def bezier_point(t, p0, p1, p2, p3):
     """计算三次贝塞尔曲线上的点"""

utils/shizi.py

@@ -68,7 +68,7 @@ def tuwai(image):
     img_bytes = img_encoded.tobytes()
     result = ocr.classification(img_bytes)
     print(result)
-    if result == "tap" or result=='tqp' or result=='top':
+    if result == "tap" or result=='tqp' or result=='top' or result=='tp':
         return True
     else:
         return False

yolotest2.py

@@ -224,3 +224,4 @@ def main():
 if __name__ == "__main__":
     main()
 
+